​In the external protection of LED lamps

Update:12 Jan 2019
Summary:

In the external protection of LED lamps, LED lamps and […]

In the external protection of LED lamps, LED lamps and soft ceramic heat-dissipating paints are recommended. The spray-type soft ceramic heat-dissipating paint can be directly sprayed on the outside of the LED lamp, and the construction operation is simple, and can be adapted to various shapes of heat-dissipating structures, and can also be adjusted to different colors, in response to the needs of landscape design. The soft ceramic particles in the spray-type heat-dissipating paint are treated by nano-treatment, and the fine particles are not only easy to be sprayed, but also the heat-conducting particles on the same coating area are dense and dense, and the area of the temperature volatilization is also increased. Let the heat of the LED luminaire be quickly conducted. Soft ceramic heat-dissipating paint is a thermosetting material, which is in compliance with RoHS environmental protection safety regulations. The construction procedure is simple and does not require any special equipment. After baking, it is heat-set and can withstand the high temperature of LED for a long time without quality change. LED street lights, LED landscape lights, or LED advertising billboards used outdoors will also face acid and alkali damage such as wind and rain, acid rain, bird droppings, air dust, and black smoke emission hELlip. Therefore, this spray-type soft ceramic heat-dissipating paint must have the characteristics of acid and alkali resistance, and the acid and alkali resistance value is in the range of PH3~11, which can effectively protect the appearance of the LED outdoor lamp from being eroded.

The cost structure of LED lamps has been continuously improved with the development of packaging technology, carrier board design and heat dissipation module structure, and the cost has also decreased with the development of technology and market demand. However, there are not many manufacturers investing in material improvement, which is mainly related to the history and habits of Taiwan's industrial and commercial development. Taiwanese manufacturers are more prone to process and design, and have less ink on material development. Therefore, in the issue of solving technical problems or reducing costs, it is more biased towards purchasing thinking or life management thinking. However, at the first time, US and Japanese manufacturers will think about the application materials, reduce costs, improve quality and increase profits from the perspective of innovation.

https://www.lucoh.com