external structure The design is novel, the structure i […]
The design is novel, the structure is clever, full of modern atmosphere, in line with the trend of the times. In the heat dissipation, we creatively adopted the air convection cavity type aluminum radiator design scheme. The radiator has two layers of heat dissipation surfaces, and the middle is connected by eight vertical reinforcements. It is transparent before and after, and there are air convection holes on the left and right sides, which enhances the air circulation inside the cavity, which is beneficial to the heat discharge, thereby effectively improving the heat conduction efficiency of the LED light source. The above unique thermal design ensures a safe operating temperature of high power LED sources below 45 °C.
LED light source
Independently developed and designed a metal bolt-type high-power LED light source. In order to improve the stability of the product, we have adopted a high-quality LED light-emitting chip imported from the United States, and the LED light-emitting chip is directly packaged on the top of the nut of the metal bolt. When assembling the product, the LED metal bolt is directly screwed on the aluminum heat sink. Therefore, the LED and the heat sink are effectively integrated into one, which changes the current status of the traditional high-power LED light source by means of the thermal conductive silica gel, greatly improving the heat conduction efficiency between the LED and the aluminum heat sink, and effectively guaranteeing The service life of the LED light source is more than 60,000 hours. At the same time, Taiwan's high-quality phosphor is used to make the brightness of a single LED reach 80 lumens or more; and there are multiple color temperatures to choose from, which can meet the different color temperature requirements of different occasions.